The 6.2 mm wide MINI MCR-SL-UI-I-LP... configurable 2-way isolating amplifier is used to electrically isolate, condition, and filter analog signals. The output loops that supply the loop-powered isolating amplifier enable the isolating amplifier to operate on an active analog input module. The modules are supplied via the current loop of the controller. On the input side, standard analog signals and non-standard analog signals can be connected, starting from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to a 4...20 mA signal. The DIP switches accessible on the housing side enable the configuration of input signal ranges. Series MCR Series Current Rating 20 mA Mounting Type DIN Rail Output Type Analog Supply Voltage 20 to 30 VDC Maximum Operating Temperature +70 °C Minimum Operating Temperature -25 °C Termination Screw Type Amplifier Input Type Current, Voltage Module Type Isolation Temperature Operating Range -25 to +70 °C Special Features Configurable 2-Way Isolation Amplifier Output Current