CBI All-in-One DC-UPS Power soluciones

Everything and more!

• More efficiency of the battery thanks to continuous control over time.
• More monitoring in main connection nodes: input, output load, battery.
• Event logging: number of battery charging cycles, charge cycles completed, aborted charge cycles, Ah charged, charging time, total number of transitions stand-by /back-up etc.
• Event Management: checking the load output, shutdown management of PCs (UPS function), RESET management of a generic equipment.
• Flexibility of use: customization of the entire charging curve of the battery, battery type setting, setting of the various time-out algorithms of charge, setting boost voltage, absorption, float, etc... configuration as DC-UPS or batteries charger, enabling power supply function.

These devices are completely automatic and can charge any kind of battery using factory pre-set charging curves suitable to the most common battery technologies: open lead acid, sealed lead acid, lead gel, Ni-Cd and Ni-MH. These devices are very flexible and can be customized to meet the needs of the user and the requirements of the application. After the installation, it is possible to carry out functional software updates just using any laptop computer. Doing so, your system can always be updated to changing requirements. The Battery Care concept is based on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. Battery faults such as battery sulfated, elements in short circuit, accidental reverse polarity connection can easily be detected, identified and removed. The All in one Series meet the highest standards of quality and insure high reliability, with MTBF values up to 300.000 hours.

C-TEC / AC-C-TEC / CTEC-P / CEM DC-UPS Ultra Capacitor Power soluciones

Ultra Capacitor based technologies provide an attractive yet efficient platform for both simple and complex aplicaciones.

DC-UPS systems are an absolute must in a world of uncertainties. DC-UPS helps to prolong the operation of machinery and controlled processes in the event of power outages or in case of power dips and sags.

Altech Corporation offers a wide variety of productos for DC-UPS systems starting at 2 A and up to 40 A along with monitoring / setup software, and comprehensive support.

The DC Back-Ups from Altech Corp.® utilize Ultra Capacitors as an innovative way to store energía within a compact design. In the event of a main power supply interruption, the energía stored in the Ultra Capacitors is released. The load is energized from the buffer module, until it‘s depleted.

Back up times depend on the state of the charge of the Ultra Capacitors and the load in which they are supplying. Compared with standard buffer modules, Ultra Capacitor units are capable of prolonged back-up times (up to 55 minutes) and fast discharges. Capacitors excel at controlled shutdown functions and allowing for the protection of computer systems. Back-up times are dependent on the load and amount of Capacitors within the unit. Back up times can be calculated to better serve the requirements of required functions.

Key características:

• Works primarily in an online parallel configuration
• Controlled shut down functions
• Up to 40 A low discharge protection through load rejection
• Ultra Capacitors have 15 years of life
• Quick back up recharges due to the nature of Ultra Capacitors
• DIN rail mount

beneficios of Capacitor Technologies

• Environmentally safe
• Free of toxic chemicals
• Virtually maintenance free
• Wide operating temperatures
• Long operational life (15 years or longer!)
• Compact and convection cooled
• Seamless switch overs
• No need to replace or maintain batteries
• Cost effective over time
• Resists shock and vibrations
• Quick buffer times

FLEX Power Single Phase / Two and Three Phase Power Supplies

More flexibility in input voltage

The FLEX line of power supplies are suitable to a wide range

of input voltage. With a single type it is therefore possible to

meet the requirements of more aplicaciones and consequently

improve design activity and stock management.