The configurable temperature transducer with 3-way isolation is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal. You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see configuration table). The measuring transducer supports fault monitoring. Color Green Depth 102.5 mm Height 93.1 mm Housing Material PBT Standards EN 61000-4-6 Width 6.2 mm Approvals UL Listed, cUL Listed, ATEX, cULus Listed, UL Listed, cUL Listed, EAC, GL, cULus Listed Number of Outputs 1