help desk software
PIC10F200-I/P by microchip technology
La imagen es representativa - ver especificaciones del fabricante
FICHA TÉCNICA

PIC10F200-I/P

Microchip Technology

MCU 8-bit - Flash - PIC10 Family PIC10F20x Series Microcontrollers - 4 MHz - 384 Byte - 16 Byte - 8 Pins. .. Ver descripción completa

Cumple con RoHS
TUBE embalaje
Accesorios
Accesorios
This product is backed by Ecco Electronics' Certificate of Compliance Guarantee. Rest assured you will receive the Manufacturer's Certificate of Compliance with your order. Certificate of Compliance Guarantee
Atributo del producto
Valor de atributo Seleccionar atributo
Productos Encontrados: 0
Proveedor:
Microchip Technology
Nº de pieza:
PIC10F200-I/P
RoHS:
Yes
HTS:
8542310015
COO:
TH
ECCN:
EAR99
Paquete estándar del proveedor Esta información se proporciona a los clientes que prefieren comprar en múltiplos de la cantidad del paquete estándar del fabricante. Las cantidades mínimas de pedido y los múltiplos de pedido requeridos se presentan con nuestra información de precios y d
60
Tipo de paquete:
TUBE
Program Memory Size:
384 B
RAM Size:
16 B
Operating Temperature:
-40 to 85 °C
Program Memory Type:
Flash
Number of Programmable I/Os:
5
ADC Resolution:
N/A
The PIC10F200-I/P is a low cost, high performance, 8bit fully static flash based CMOS microcontroller in 8 pin DIP package. It employs RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (1µs) except for program branches which take two cycles. The easy to use and easy to remember instruction set reduces development time significantly. The PIC10F200-I/P is equipped with special features that reduce system cost and power requirements. The power on reset (POR) and device reset timer (DRT) eliminates the need for external reset circuitry.
Palabras clave de búsqueda:
PIC10F200IP
EN STOCK: 5.880
Puede enviar inmediatamente
Cantidad mínima de pedido:
60
Múltiple:
60
Plazo de entrega de fábrica
18 Semanas
Precio (USD)
Cantidad
Precio por unidad
Precio Ext.
60
$0.575
$34.500
300
$0.551
$165.300
540
$0.547
$295.380
1.020
$0.546
$556.920
2.520
$0.531
$1,338.120
5.040
$0.530
$2,671.200
7.500
$0.525
$3,937.500
10.020 +
$0.524
$5,250.480
Suppliers Standard Package
Product Changes
PDF PCN - 28-Aug-2008 - Microchip is qualifying the G600C Mold Compound and 8361 J Die attach Epoxy for 8L, 14L, and 16L PDI
PDF PCN - 08-Oct-2010 - Microchip is announcing the quallification of 8L, 14L, & 16L PDIP at GTK (GRTK) assembly site for th
PDF PCN - 15-Oct-2008 - QUALIFICATION OF E500 MOLD COMPOUND AND 84-1LMISR4 DIE ATTACH EPOXY FOR 8L PDIP AT MMS ASSEMBLY
PDF PCN - 08-Nov-2010 - Microchip is announcing the qualification of the CRM-1064L die attach in 28L SPDIP (.300) & 8/18L PD
PDF PCN - 26-Oct-2007 - LABEL SIZE CHANGE FROM ALUMINUM BAGS & INNER BOXES 17X4 CM2 TO 14X4 CM2
PDF PCN - 24-Jun-2008 - Microchip is qualifying a new assembly site of 8L PDIP .300" package Linear Devices, Mixed Signal De
PDF PCN - 21-Oct-2008 - Microchip is changing the Format and adding quantity barcode to the standard die/wafer inner box lab
PDF PCN - 31-Oct-2008 - QUALIFICATION OF G600C MOLD COMPOUND AND 8361J DIE ATTACH EPOXY AT ANAP ASSEMBLY
PDF PCN - 25-Oct-2013 - Pic10F200/202/204/206 6-Pin, 8-Bit Flash Microcontrollers Data Sheet Document Revision
PDF PCN - 19-Apr-2010 - Microchip is announcing the qualification of 8L, 14L, & 16L PDIP at GTK (GRTK) assembly site for the
PDF PCN - 08-Oct-2007 - Qualification of GE800 mold compound in assorted PDIP/SPDIP packages at ALPH.
PDF PCN - 30-Jan-2011 - QUALIFICATION OF CRM-1064L DIE ATTACH IN 28L SPDIP (.300) & 8/18L PDIP (.300) PACKAGES
PDF PCN - 07-May-2008 - Microchip is qualifying the G600 mold compound for 8L PDIP package at UNIS in order to improve manuf
PDF PCN - 09-Nov-2011 - Microchip is announcing the qualification of 8L, 14L, 16L, 20L PDIP, & 28L SPDIP with CRM-1064L die
PDF PCN - 30-Apr-2007 - Qualification Of 6L Sot-23 Package With 8900Nc Non-Conductive Die Attach Epoxy At Mtai
PDF PCN - 10-Nov-2010 - Microchip is announcing the amended of its previous notice CYER-05LNSD835 which announces the implem
PDF PCN - 08-Mar-2007 - Product Change Notice
PDF PCN - 26-Jan-2011 - Microchip is announcing qualification of CRM-1064L die attach in 28L SPDIP (.300) & 8/18L PDIP (.300
PDF PCN - 30-Apr-2007 - QUALIFICATION OF NITTO GE800 MOLD COMPOUND FOR PDIP AND SPDIP PACKAGES ASSEMBLED AT MTAI
PDF PCN - 24-Aug-2011 - Microchip is announcing the qualification of 8L, 14L, 16L, 20L PDIP, & 28L SPDIP with CRM-1064L die
PDF PCN - 21-Sep-2011 - Microchip is releasing the v9.83 HI-Tech C for the listed PIC10/12/16 MCUs in order to provide new s
PDF PCN - 05-Nov-2010 - QUALIFICATION OF 8L, 14L, & 16L PDIP AT GTK (GRTK) ASSEMBLY SITE.
PDF PCN - 18-Oct-2013 - QUALIFICATION OF SELECTED PRODUCTS WITH PALLADIUM COATED COPPER (PDCU) BOND WIRE AT MTAI
PDF PCN - 18-Oct-2013 - QUALIFICATION OF SELECTED PRODUCTS AVAILABLE IN THE 28L SPDIP, 18L PDIP, AND 8L PDIP PACKAGES
PDF PCN - 30-Jul-2010 - QUALIFICATION OF 8L, 14L, & 16L PDIP AT GTK (GRTK) ASSEMBLY SITE.
PDF PCN - 17-Jun-2008 - Microchip is announcing the qualification of G600 mold compound for 8L PDIP package at units for the
PDF PCN - 31-Oct-2008 - QUALIFICATION OF G600C MOLD COMPOUND
PDF PCN - 31-Oct-2007 - QUALIFICATION OF GE800 MOLD COMPOUND IN ASSORTED PDIP/SPDIP PACKAGES AT ALPH
PDF PCN - 18-Oct-2013 - QUALIFICATION OF SELECTED PRODUCTS AVAILABLE IN THE 28L SPDIP, 18L PDIP, AND 8L PDIP PACKAGES
PDF PCN - 24-Feb-2008 - CHANGE IN INNER BOX LABEL FORMAT TO INCLUDE ADDITIONAL BAR CODE
PDF PCN - 25-Nov-2011 - QUALIFICATION OF 8L,14L,16L,20L PDIP & 28L SPDIP WITH CRM-1064L DIE ATTACH AT ALPH ASSEMBLY SITE
PDF PCN - 28-Feb-2011 - QUALIFICATION OF CRM-1064L DIE ATTACH IN 28L SPDIP (.300) & 8/18L PDIP (.300) PACKAGES
PDF PCN - 19-May-2011 - Microchip is announcing the qualification of 8L DFN (2x3) packages with EFTEC-64T leadframe at NSEB
PDF PCN - 25-Sep-2007 - Change in shipping box dimensions and lables at MTAI for all Microchip catalog parts Packed in reels
PDF PCN - 15-Oct-2008 - QUALIFICATION OF E500 MOLD COMPOUND AND 84-1LMISR4 DIE ATTACH EPOXY FOR 8L PDIP PACKAGE AT MMS
PDF PCN - 19-Sep-2008 - Microchip is qualifying E500 Mold Compound and 84-1LMISR4 Die Attach Epoxy for 8L PDIP Package at MM
PDF PCN - 02-Nov-2007 - Microchip is qualifying G600 mold compound in PDIP packages at CEI and NSEB.
PDF PCN - 15-Feb-2011 - Microchip is announcing the change in package and implementation of new shipping labels for all list
PDF PCN - 26-Jan-2009 - Microchip Technology is changing the shipping materials from moisture barrier bag to static shielded
PDF PCN - 24-Jan-2008 - Change in Inner Box Label Format MTAI to include additional Bar Code for total quantity of parts shi
PDF PCN - 19-May-2008 - ADDING NEW ASSEMBLY SITE
PDF PCN - 23-Jul-2009 - Microchip is changing the inner box and outer carton for all packages packed in tubes at MTAI assemb
PDF PCN - 31-May-2008 - QUALIFICATION OF G600 MOLD COMPOUND FOR 8L PDIP PACKAGE AT UNIS
PDF PCN - 10-Sep-2009 - CHANGE INNER BOX AND OUTER CARTON FOR ALL PACKAGES PACKED IN TUBES AT MTAI ASSEMBLY SITE
PDF PCN - 15-Sep-2008 - Microchip is changing the bill of material by changing the mold compound to G600C and Die Attach Epo
PDF PCN - 26-Jan-2011 - Microchip is announcing the qualification of CRM-1064L die attach in 28L SPDIP (.300) & 8/18L PDIP (
PDF PCN - 05-Aug-2010 - Microchip is announcing the implementation of shipping label and package change for the listed produ
PDF PCN - 31-May-2008 - QUALIFICATION OF G600 MOLD COMPOUND FOR 8L PDIP PACKAGE AT UNIS
PDF PCN - 25-Nov-2011 - QUALIFICATION OF 8L, 14L, 16L, 20L PDIP & 28L SPDIP WITH CRM-1064L DIE ATTACH AT ALPH ASSEMBLY SITE

© 2026 ECCO GROUP ECIA